Product photo
Rackmount AC DC Telecom Inverter
XMI-HR Series · Intelligent AC and DC integrated power supply · Standard 19-inch rack-mount design · Supports wall-mounted and embedded installation · AC 220V and DC 48V output can be used simultaneously (AC and DC isolated).
Model: XMI-HR Series (XMI10HR-X / XMI20HR-X / XMI30HR-X / XMI60HR-X / XMI100HR-X / XMI150HR-X)
Power range
1kVA–15kVA
Output
AC 220VAC ±2% (inverter mode) · DC 48V output (AC/DC isolated)
Input
AC 176–250VAC (settable) · 50Hz ±5% · PF ≥0.99 · DC 48V battery
Switching time
≤10ms
| Parameter | Value |
|---|---|
| Series | XMI-HR |
| Power range | 1kVA–15kVA |
| Models | XMI10HR-X · XMI20HR-X · XMI30HR-X · XMI60HR-X · XMI100HR-X · XMI150HR-X |
| Rated capacity | 1kVA · 2kVA · 3kVA · 6kVA · 10kVA · 15kVA |
| AC input voltage | 176–250VAC (settable) |
| Input frequency | 50Hz ±5% |
| Input power factor | ≥0.99 |
| DC voltage | 48VDC |
| AC output power factor | 0.8 |
| AC output voltage (inverter mode) | 220VAC ±2% |
| Efficiency (inverter mode) | ≥90% |
| Output frequency (inverter mode) | 50Hz ±0.25Hz |
| Output waveform | Pure sine wave (inverter mode) |
| THDu | ≤3% (linear load under full load) |
| Overload | 125% rated load: protection after 1 minute · 150% rated load: protection after 10 seconds |
| Switching time | ≤10ms |
| DC output | 48VDC (available depending on configuration; AC and DC isolated) |
| Parallel capability | 3kVA module maximum 5 units in parallel |
| Low-voltage warning (battery) | 43VDC ±0.5VDC |
| Under voltage (battery) | ≤40VDC |
| Overvoltage protection point (battery) | ≥60VDC |
| Overvoltage recovery (battery) | ≥55VDC |
| Reverse connection protection | Yes |
| Output overvoltage protection (inverter mode) | ≥245VAC |
| Output low-voltage warning (inverter mode) | ≤200VAC |
| Output short circuit protection | Yes |
| Cooling / thermal protection | Built-in fan for heat dissipation · Intelligent speed regulation according to load · Over temperature protection |
| Battery rated voltage | 48VDC |
| Charging voltage range | 53–59VDC (settable) |
| Charging current options | 6A / 20A / 30A / 50A (depends on configuration) |
| Communication | Standard RS485 / RS232 · SNMP optional · Dry contacts (mains failure / low battery / system alarm) |
| Dimensions (W×D×H) | 482.6×350×44.5mm (1U) · 482.6×500×88mm (2U) · 482.6×492×222mm (5U) |
| Weight | <10kg / <20kg / <30kg / <50kg (depending on model) |
| Minimum order | 67 |